Turning your upperjaw into a mouthguard

Arno Hermans

by Arno Hermans, 3Dmouthguard

3Dmouthguard improves the way athletes enjoy their favorite sport by using cutting edge technology to produce sports apparel. With its new AM technique, combined with the 3D filament material characteristics, 3Dmouthguard completely automates and digitizes the process of producing customized mouthguards and print them instantly. Discover the world’s first 3Dprinted sportsguard.

program: https://3dmedicalconference.com/program/

Continue reading “Turning your upperjaw into a mouthguard”

Comparing biocompatibilities of 3D-printed absorbable metal implants

Holger Jahr

by Holger Jahr, Uniklinik RWTH Aachen

Additively manufactured absorbable porous metal implants possess promising mechanical and degradation properties in vitro and thus hold potential to meet various clinical applications. A reliable evaluation of these novel implants, however, requires an improved predictability of their biocompatibility and in vivo degradation characteristics from in vitro results. Current pre-clinical in vitro evaluation of medical devices still occurs under largely static culture conditions, while dynamic interstitial fluid flow regulates clearance of degradation products in vivo.

Continue reading “Comparing biocompatibilities of 3D-printed absorbable metal implants”

EU-funded project GIOTTO: The next challenge for smarT nanobiOmaterials and 3D technologies to treat osteoporotic fractures

lisa bregoli

by Lisa Bregoli, EU funding expert, Senior Project Manager, Warrant Hub S.p.A., European Funding Division

Osteoporosis is a systemic, degenerative disorder affecting more than 200 million people in the world. In osteoporotic individuals, the density and quality of bones are reduced; this reduction occurs progressively and often without symptoms. As a result, bones become weak and the risk of fracture from a fall or, in serious cases, from minor trauma dramatically increases. These so-called fragility fractures decrease the quality and lifespan of affected patients. With progressive rise in life expectancy, osteoporosis is becoming a socio-economic challenge.

Continue reading “EU-funded project GIOTTO: The next challenge for smarT nanobiOmaterials and 3D technologies to treat osteoporotic fractures”

Individualized bone replacement parts by hybrid ceramic manufacturing

tassilo moritz

by Tassilo Moritz, Fraunhofer Institute for Ceramic Technologies and Systems IKTS

Recently, the innovative Freeze Foaming technique has been developed by Fraunhofer IKTS which allows producing an open cellular structure with a bimodal pore size distribution.

In in-vitro tests foams made of tricalciumphosphate and hydroxyapatite have been investigated with mice stem cells showing that the cells proliferate and start to differentiate and to form collagene structures. Now this method was combined with Vat Photo Polymerization (VPP) as an Additive Manufacturing technology for ceramic materials.

Continue reading “Individualized bone replacement parts by hybrid ceramic manufacturing”

Nanofiber technologies for improving the biological compatibility of metal implants

marek pokorny

by Marek Pokorny, Contipro a.s.

In the current project we deal with surface modification of implants for large joints, which are prepared by traditional and additive technologies. Czech private company Prospon s.r.o., material scientists from the Academy of Sciences of the Czech Republic, and we from private company Contipro a.s. as specialists in surface treatment of 3D surfaces with the help of an electrostatic field are involved in the project.

In my presentation I would like to draw attention to the importance of surface treatment of 3D implants intended for pharmacy. A surface layer of a metal implant affects its acceptance by the human body. The surface treatment enhances metal implant properties e.g. its biocompatibility, enhance a cell adhesion and proliferation, reduce inflammatory responses, and facilitate integration between the implant and surrounding tissues.

Continue reading “Nanofiber technologies for improving the biological compatibility of metal implants”

Voxel Printing for Surgery

Nicholas Jacobson

by Nicholas Jacobson, MIX Design

Voxel printing is the ability to vary material point by point across a 3d printed model. This allows us to better model changes in tissue and structure in fine detail. I will be showing our latest work using voxel printed model in the OR for Neurology, Hapatobiliary transplantation, and Cardiology. Finally I’ll be covering some of our latest custom tools for modeling and 3d printing.

Continue reading “Voxel Printing for Surgery”

3D Printing with High Perfomance Polymers for Implants and other Medical Products

stefan leonhardt

by Stefan Leonhardt, Kumovis

We at Kumovis developed a specialized 3d-printing system including clean-room technology. It is capable of processing high performance polymers like PEEK, PEKK, Ultem or PPSU. Furthermore, a special focus is set on degradable polymers.

At the conference we will present our technology and show results regarding achievable clean-room class inside our 3d-printing system. Also first clinical use-cases like using our technology for the lower jaw reconstruction will be presented.

Continue reading “3D Printing with High Perfomance Polymers for Implants and other Medical Products”

Disruptive Multi Material 3D Technology

Rene van der Meer

by Rene van der Meer, Lake3D

The start-up Lake3D wants to develop the first 3D Dental printer based on Multi Material 3D inkjet. It uses printheads suited for high temperatures and high viscous materials that make it possible to jet class II medically certified materials that are already being used in traditional 3D (SLA) printers. Combining different materials makes it possible to print objects with the right colour, transparency and mechanical characteristics. This might bring a revolution in 3D printing as colour did in television.

Continue reading “Disruptive Multi Material 3D Technology”